unlock Huawei – Reset Android

The following tutorial will teach you how to reset Android on your Huawei Ascend g300. This will help you regain control of your Huawei phone, even if you lost your pattern lock password, it just  doesn´t run at the speed it should or the Android operating system keeps throwing errors at you.

To achieve reset Android have two options, both with the same purpose of achieving a factory data reset on your Huawei Ascend g300. Each method, however, is differently applied.

First way to reset Android on your Huawei Ascend g300

You will reset Android on your Huawei Ascend g300 by using the Android application menu, so for this method to work you need your phone in working condition. If it is the case, then you simply follow the steps below:

  1. From the Settings menu to enter Backup and Restore
  2. Tap Factory data reset
  3. After entering Reset Phone
  4. At the end , press Clear All

On this screen, your Huawei Ascend G300 will prompt you to format the memory card , if you do so, then all your data will be deleted ( images , videos , music, etc. ).

Wait some time after confirming, as the reset Android procedure can be a bit lengthy before you get access into your factory default phone and thus can enter the initial settings as if it was recently purchased.

RESET ANDROID ON THE HUAWEI ASCEND G300

In this alternative way to reset Android on the Huawei Ascend g300 method, you will gain access into the emergency Android recovery menu. Do not worry, it’s easier than you think, you only need to use a combination of buttons:

  1. Turn off your phone and wait a few seconds before going to the second step
  2. Press the VOLUME UP and the POWER buttons and hold
  3. When you see the recovery screen release both buttons
  4. Move inside the menu using the VOLUME buttons until “Wipe data / Factory reset” is selected
  5. Confirm it with the POWER button
  6. Do the same with ” Yes – Delete all user data” and wait for the process to complete
  7. Once back to the main screen confirms the “Reboot System Now” option and wait

Congratulations, you just reset Android on your Huawei Ascend G300: Your phone will reboot and you ‘re ready to use it as if you just bought it!

If at any time your Huawei Premia 4G M931 loses its fluidity, bercomes slow or you happen to forget the lock pattern password, you will most probably solve it by doing a hard reset Android on your phone.

This tutorial will return Android’s status into factory default and your phone will forget any custom settings (including the pattern lock password) and installed apps..

Before continuing, consider the following: if your Huawei Premia 4G M931 is still usable, you may want to  backup the information through one of the applications on Google Play.

We will teach you two methods that will hard reset Android on your Huawei Premia 4G M931. Each method performs the same action but differ in the following way:

The first method  is useful for those cases where you have no access to the  Android operating system. It is performed starting with the phone powered off and achieved by pressing a secuence of buttons, gaining access into a hidden recovery menu inside your Huawei Premia 4G M931:

RESET Android in Huawei Premia 4G M931 through buttons

For this method we need the phone has at least 50% of battery. If there is not enough “juice” left inside your Huawei Premia 4G M931, the process may remain incomplete and cause serious damage to the operating system of the phone.

  1. With the phone turned off, press both VOLUME UP, VOLUME DOWN and the POWER buttons.
  2. When your phone starts up and you see the Huawei logo, release the VOLUME UP and DOWN buttons while still holding down the POWER button.
  3. Keep the POWER button pressed until the Android recovery mode starts.
  4. Within the recovery menu, use the VOLUME buttons to scroll down into “Wipe data / Factory reset” and accept with the power button.
  5. On the next screen select the option “Yes – Delete all user data” and wait until the process is done.
  6. Select the option of “Reboot System Now” and see that the phone restarts as if it were your first time with all the original factory settings.

Unlock Android in Huawei Premia 4G M931 with the menu 

The second method will allow you to access the official Android recovery menu found by default in all versions of the Android operating system.

Please navigate into Settings> Backup and Restore> Factory data reset> Reset phone> Erase everything. Wait for the process to finish and voilá! You will factory restore your Huawei Premia 4G M931 as if just unboxed.

You may need to reset Android on your Huawei MediaPad 7 Lite because maybe you forgot the pattern lock password, or your Android device is working too slow, or it is behaving erratically:

Performing a hard reset on your Huawei MediaPad 7 Lite will restore it into factory default settings.

Unfortunately it will also delete all your personal files and installed apps. If you still have working access into your tablet’s Android OS, then you may be interested in performing a backup in order to preserve your data.

Having said that, the bottom line is: Many problems will be solved by executing a hard reset Android on your Huawei MediaPad 7 Lite.

First method to RESET Android  on the Huawei MediaPad 7 Lite

For this method we need a usable Android inside your tablet, as we  will use the Huawei MediaPad 7 Lite settings menu itself. If you do not have access to it, maybe due to a forgotten lock pattern password, please go to the next section.

To restore your system from the Android menu follow the steps :

  1. From Android’s Main screen, invoke the Settings menu.
  2. Select Backup and Restore
  3. Select Factory data reset
  4. Click on Reset phone
  5. Finally , click Clear All
  6. After a few minutes the tablet will reboot, asking for you to do a “first time configuration” (meaning that you have successfully reset Android into factory default).

SECOND METHOD TO UNLOCK ANDROID ON Huawei MediaPad 7 LITE

For users who do not have access to the Huawei MediaPad 7 Lite tablet operative system, this is the method that will solve their problems:

  1. Turn off the tablet and wait 10 seconds to continue
  2. If you have inserted a memory MicroSD , remove it and put it back
  3. While holding the VOLUME DOWN press the POWER button for at least 10 seconds
  4. The tablet will turn on and after displaying the logo of the company for some seconds, it should show an Android with gears
  5. If this happens , wait a few minutes until the screen says ” OK”.
  6. Remove the MicroSD memory and wait for your Huawei MediaPad 7 to restart. If it does not restart, then please reset it manually.